AUTOMATIC WATER TANK LEVEL INDICATOR & MOTOR CONTROL USING ULTRASONIC SENSOR

Admin 5 years ago 1981 0

Project URL

https://www.instructables.com/id/AUTOMATIC-WATER-TANK-LEVEL-INDICATOR-MOTOR-CONTROL/

Parts you need for this project

• 
  Arduino Uno Rev3-Main Board
  x 1
• 
  Buzzer 6-12V c/w Wire
  x 1
• 
  Low Cost Ultrasonic Ranging Module
  x 2
• 
  LCD (16x2) - Yellow Backlight
  x 1
• 
  3 pins Toggle Switch
  x 1
• 
  IC ULN2003
  x 1
• 
  Songle SPDT Relay SRD 06V
  x 1
• 
  LED 5mm Green
  x 2
• 
  LED 5mm Red
  x 2
• 
  LED 5mm Yellow
  x 2
• 
  Adapter 12V 2A (UK Plug)
  x 1
• 
  Donut Board (Small) 6x15cm
  x 1
• 
  Resistor 0.25W 5% (220K)
  x 10
• 
  Bolt M3x14mm
  x 20
• 
  Potential Meter 10K
  x 1

Comments (0)